connector accessories 42 glenair, inc. 1211 air way glendale, ca 91201-2497 818-247-6000 fax 818-500-9912 ? 2003 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com 290-011 and 290-012 stainless steel molding adapters variable entry fixed entry d c a thread b .60 (15.2) e g f a thread tightening & staking indentations 2.00 (50.8) max basic part no. shell size (table ii) entry size (table iii) 290ws011- 18 basic part no. shell size (table i) 290ws012- 18 12 to select the appropriate molding adapter, consider the following ba- sic suggestions to ensure a high integrity, quality molded termination: select a molding adapter which will provide adequate inside working room to accept the ter- mination envelope, especially if there are shield terminations, splices, etc. if the termination is to be molded with neoprene or other material using a transfer molding pro- cess, select the molding adapter cable entry diameter close to the outside diameter of the cable or termination envelope. prior to use, lubricate o-rings with high grade silicone lubricant (moly- kote m55 or equivalent). metric dimensions (mm) are indi- cated in parentheses. tightening & staking indentations o-ring .60 (15.2) 1.28 (32.5) max o-ring shell size 10 12 14 16 18 20 22 24 a thread class 2b 5/8 - 24 unef 3/4 - 20 unef 7/8 - 20 unef 1 - 20 unef 1 1/8 - 16 un 1 1/4 - 16 un 1 3/8 - 16 un 1 1/2 - 16 un b dia max .855 (21.7) .965 (24.5) 1.090 (27.7) 1.220 (31.0) 1.370 (34.8) 1.525 (38.7) 1.655 (42.0) 1.775 (45.1) d dia .670 (17.0) .780 (19.8) .905 (23.0) 1.020 (25.9) 1.135 (28.8) 1.250 (31.8) 1.383 (35.1) 1.510 (38.4) c dia .430 (10.9) .535 (13.6) .660 (16.8) .785 (19.9) .880 (22.4) 1.005 (25.5) 1.130 (28.7) 1.255 (31.9) table i replacement o-ring part numbers * * parker o-ring part numbers. compound n674-70 or equivalent. shell size 10 12 14 16 18 20 22 24 piston o-ring 2-014 2-016 2-018 2-020 2-022 2-024 2-026 2-028 max entry 10 12 14 16 18 20 22 24 table iii f dia .430 (10.9) .535 (13.6) .660 (16.8) .785 (19.9) .880 (22.4) 1.005 (25.5) 1.130 (28.7) 1.255 (31.9) g dia .670 (17.0) .780 (19.8) .905 (23.0) 1.020 (25.9) 1.135 (28.8) 1.250 (31.8) 1.383 (35.1) 1.510 (38.4) entry no. 10 12 14 16 18 20 22 24 torque values entry no. 10 12 14 16 18 20 22 24 torque 5 in. lbs. 80 100 120 120 140 140 140 150 table ii a thread class 2b 5/8 - 24 unef 3/4 - 20 unef 7/8 - 20 unef 1 - 20 unef 1 1/8 - 16 un 1 1/4 - 16 un 1 3/8 - 16 un 1 1/2 - 16 un shell size 10 12 14 16 18 20 22 24 e dia max .855 (21.7) .965 (24.5) 1.090 (27.7) 1.220 (31.0) 1.370 (34.8) 1.525 (38.7) 1.655 (42.0) 1.775 (45.1)
|
